Abstracts are provided where shown.
'Corrosion Experience with 'Marine' Aluminium Alloys', Ben Hooker, Babcock 01/10
"A new anode material to minimise the risk of stress corrosion on high strength steels in seawater", Valerie Debout, DCN 10/97
"The corrosion performance of aluminium alloys in marine environments" , Mr Keith Stokes, DRA 07/95
‘Material Testing in Super Critical CO2 Environments’, Matthew Peet, CAPCIS, 04/10
‘Numerical Simulations for Design and Monitoring of Offshore Structures’ ICCP Systems’,Jacques Parlongue, Elsyca, Belgium 04/10
‘Recent Impressed Current Offshore Cathodic Protection Solutions’, Jim Britton, Deepwater Corrosion Services Inc 01/10
'Novel Treatment of Accelerated Low Water Corrosion on Harbour Structures’, Barry Lamb, BAC Corrosion Control Ltd 10/09
'Cathodic Protection of the Thames Barrier', Brian Wyatt, Corrosion Control 07/09
‘CP on Offshore Wind Farms & Renewables’, Ross Fielding, Impalloy 04/09
'Mathematical Modelling of Interactions Between Impressed Current and Sacrificial Anode Cathodic Protection Systems in Offshore Installations’, Robin Jacob, Corrosion Consultancy & Cristina Peratta & John Baynham, CM BEASY 01/09
'ICCP and Anti Fouling’, Steve Ellis, Cathelco 01/09
‘Corrosion Control on Marine Reinforced Concrete’, Brian Wyatt, Corrosion Control 07/08
'Computer modelling of cathodic protection, applications on a harbour integrity design', Ernesto Manuel Santana-Diaz, DNV 04/08
‘Welding, Joining and Corrosion’, Charlie Barraclough, Commtech Associates Ltd 01/08
' Expert 3D Software Simulations for Cathodic Protection in Offshore and Marine Environments', Leslie Bortels, Elsyca, Belgium 07/07
'Some Marine Coating and CP Failures', Chris Googan, Anti Corrosion Engineering 04/07
‘Low Signature ICCP Systems - Recent Developments - Future Concepts’, Barry Torrance (Aish Technologies Ltd) 10/06
‘Application of Physical Scale Modelling to the Evaluation of a ship’s ICCP Systems’, Horst-Friedrich Arendt (ex-Bundeswehr Technical Centre for Ships and Naval Weapons, Germany) 10/06
‘Cathodic Protection of Offshore Systems Based on the New ISO Standard 15889-2. Some Practical Applications’, Svein Eliassen (Statoil) 04/05
‘Cathodic Protection of reinforced concrete in the marine environment’, Jim Preston (Corrosion Control Services Ltd) 04/05
‘Modelling of marine cathodic protection systems’ David Tighe-Ford, Cranfield University 10/04
'Impressed Current Cathodic Protection Equipment', Barry Torrance (Aish Technologies) 07/04
'Predicting the Effectiveness of Corrosion Control Measures Using Computer Simulation', Robert A. Adey & Ernesto Santana Diaz (BEASY) 07/04
'Control of Cathodic Protection on CRA Pipelines', Robin Jacob (Corrosion Consultancy) 04/04
'Corrosion in our Ports and Harbours', Roddy James (CorrOcean) 04/03.
'Experimental Impressed Current Anode Design', Barry Torrance (Aish Technologies) 10/02
‘Potential Control and Hydrogen Embrittlement – An Update’, Robin Jacob (Corrosion Consultancy Ltd) 07/02
'Hydrogen embrittlement Stress Corrosion Cracking of Superduplex Stainless Steel Under Cathodic Protection', Paul Woollin (TWI) 10/01
'Calcareous scales formed by cathodic protection- an assessment of their characteristics and kinetics', A P Morizot and A Neville (Corrosion and Surface engineering Research Group, Heriot-Watt University) 04/01
'Cathodic Protection: Hydrogen Pick-up and Transport', Alan Turnbull (NPL) 07/98
'Cathodic protection and hydrogen embrittlement', Robin Jacobs (Global Corrosion) 07/98
"Corrosion fatigue of cathodically protected high strength steels - the role of sulphate reducing bacteria", Dr Mike Robinson, Cranfield 01/97
"Alloy materials for CP systems", Dr Bob Crundwell, Britannia Alloys and Chemicals 07/96
"The RCP method for prevention of local corrosion on stainless steels in saline water piping systems", Mr Craig Donald, CorrOcean Ltd 04/96
“Sacrificial Anode Protection of Firewater/Seawater Lift Pump Caissons”, Dave Glasgow, ACEL
'Application
of cathodic protection at limited potentials',
Dr
Robin Jacobs, Global Corrosion Consultants
‘A Nanocomposites Approach to Environmentally Friendly Anti-corrosion Coatings’, John Hay, University of Surrey 01/10
'An Introduction to IMO – PSPC Coating Specification for Ballast Tanks’, John Carter, Bodycote Testing Ltd 10/08
‘Natural Products for Anti-fouling Coatings’, Lily Chambers, Southampton University & Keith Stokes, DSTL 10/07
'Some Marine Coating and CP Failures', Chris Googan, Anti Corrosion Engineering 04/07
‘Organic coatings, using results for Scanning Kelvin Probe and Scanning Acoustic Microscopy’, John Sykes (Oxford University) 01/07
‘Performance Monitoring and Analysis of Ships’ Tank Coatings’, Keith Lucas, Director of Center for Corrosion Science & Engineering, US Naval Research Laboratory 10/05
‘Demands and expectations to protective coating systems: FPSOs versus Merchant Vessels, a few crucial differences’, Kjell Haugland (Jotun Paints) 07/04
'Methods of Surface Preparation to Extend Coating Life', Malcolm Morris & Graham Boaler (Leigh's Paints) 07/04
‘New
DNV Recommended Practices on Submarine Pipeline Corrosion Control’,
Tomas Sydberger (DNV, Norway)
‘How does current EU Legislation effect the Performance of Future Fastener Coating Processes?’, David G James (Surface Engineering Specialists Ltd) 07/03
‘Current
Requirements and Developments for Marine Anti-fouling Paints’,
Julian Hunter, Akzo Nobel International Paints)
‘Why Listen to
Electrochemical Noise? Erosion-corrosion
related noise of HVOF aluminium bronze and nickel aluminium bronze coatings’
T.S.
Tan, R.J.K. Wood and J.A. Wharton (Surface Engineering & Tribology Group,
School of Engineering Sciences, University of Southampton)
‘Coatings to protect nickel aluminium bronze’, Robin Oakley (QinetiQ) 01/03
'Erosion-corrosion of marine pipework: failure of HVOF coatings', Andrew Speyer (University of Southampton) 01/01
'Corrosion control: the practical application of polymer technology in the marine industry' ,Gavin Bowers (Belzona) 01/01
'The impact of extended docking intervals on the maintenance of ship coatings beneath the waterline', David F Jones
(UMC International Plc) 01/01
'Development of corrosion resistant coatings by high velocity oxyfuel
(HVOF) spraying', Dave Harvey (TWI) 10/00
'Examination of coating failure in marine environments using scanning acoustic microscopy', John Sykes (Oxford University) 07/99
'Corrosion and erosion-corrosion coatings of thermally sprayed Cermet coatings', Trevor Hodgkiess (Glasgow University) 03/99
'Surface preparation and marine coating performance', David Buckle (W&J Leigh & Co.) 01/99
'Replacement of cadmium and chromates in metal finishing', Kevin Baldwin, DERA 01/98
"Metallic coatings by HVOF spraying for corrosion protect in marine environments", Dr Andy Sturgeon, TWI 07/97
"Practical applications of coatings for preventing corrosion and wear", Dr Maxine Watson, AEA Technology 01/97
'Ceramic/metallic corrosion resistant
coatings',
Mark
F Mosser - Sermatech International
‘Paint Systems for the Protection of Marine and Offshore Structures’, Dr N R Whitehouse, Paint Research Association 06/93
‘Composites used in Minesweepers’, Jody Dazel-Job (QinetiQ, Rosyth) 10/03
‘The Degradation of Polymer Composites in Marine Environments’,
Bill Broughton (NPL)
‘Inspection of GRP and composites for marine applications’, Gary
Penney (TWI) &
‘State-of-the-art techniques for the ultrasonic inspection
of large area (marine) composite structures’,
Richard Freemantle
(NDT Solutions)
‘Rules for, and Applications of, Marine Composites’, John Howson (Lloyds Register) 10/03
'Corrosion control: the practical application of polymer technology in the marine industry' ,Gavin Bowers (Belzona) 01/01
"The effects of insulation defects on the corrosion of sub-sea superduplex stainless steel process pipes", Dr Roger Francis, Weir Materials 07/97
"Use of GRP pipes in ships and offshore", Mr George Grim, Shell Trading & Shipping Company 10/96
"The performance of concretes in chloride containing conditions", Mr Ray Cox, BRE 07/96
"Structural
Adhesives",
Mr Alan Hunter, Altra Consultants Ltd.
“Nuclear Electric's experiences of corrosion in cooling water
systems”, Mr Terry Parsons, Nuclear Electric
“The Possibilities For Screwed & Polymer Lined Pipelines”, Philip Jaques, Hunting Oilfield Services 01/95
'Corrosion in Seawater Cooling Systems’, Clive Tuck, Lloyd's Register EMEA 10/09
'Galvanic Corrosion Performance of High Strength Copper-nickel Alloys in Seawater', Julian Wharton, University of Southampton 10/09
‘Response of 70-30 CuNi to conditioning pre-treatments and sulphide exposure’, R Oakley & J. Galsworthy, QinetiQ 01/09
'Stress Corrosion Cracking of NAB’, Jean-Loup Heuzé, DCN 04/08
‘The Replacement of Corrosion-resistant Castings by Fabricated Weld Overlay Components, Norman Cooper, BAE Systems 10/07
‘An Overview of Recent Copper-Nickel Sheathing Studies’, Carol Powell, Nickel Institute 07/07
‘Exemplary Long-Term Performance of Certain Materials in Marine Environments’, Bopinder Phull, Consultant (ex LaQue) 04/07
‘Electrochemical Behaviour of CuNi 90/10 in Chlorinated Seawater under Stagnating Conditions.’, Wilhelm Schleich , KME 04/07
‘Corrosion failure investigation techniques and case studies’, Robin Oakley (QinetiQ) 01/07
‘Copper nickel chromium alloy as a replacement for nickel aluminium bronze in sea water system application’, Jagath Mawella, Sea Technology Group, DPA/MoD, 01/06
‘Avoiding corrosion in copper plumbing systems’, Phil Munn, CESL 10/05
‘Corrosion
Performance of NAB Under Seawater Immersion and Erosion-corrosion Conditions’,
Rakesh Barik, Julian Wharton & Robert Wood ( Surface Engineering &
Tribology Group, School of Engineering Sciences, Southampton University) &
Keith Stokes (DSTL)
‘Welding Issues with Copper Alloys’, Mike Gittos & Chris Punshon (TWI) 07/05
‘Long-term and Accelerated Corrosion Performance of Cast Nickel Aluminium Bronze in Seawater’, Robin Oakley and John Galsworthy (QinetiQ) 07/05
‘Development of Very High Strength Copper Alloys with Resistance to Hydrogen Embrittlement and Stress Corrosion’, Clive Tuck (Langley Alloys) 04/05
‘Service Recommendations for CuNi 90/10 Seawater Piping Systems’, Wilhelm Schleich (KM Europa Metal) 01/04
‘Why Listen to
Electrochemical Noise? Erosion-corrosion
related noise of HVOF aluminium bronze and nickel aluminium bronze coatings’
T.S.
Tan, R.J.K. Wood and J.A. Wharton (Surface Engineering & Tribology Group,
School of Engineering Sciences, University of Southampton)
‘Coatings to protect nickel aluminium bronze’, Robin Oakley (QinetiQ) 01/03
‘Advantages of CuNi 90/10 pipes for sea water service. Recent results from testing in natural North Sea water’, Manfred Jasner (Marine Applications, KM Europa) 07/02
'Recent developments in the use of high strength cupro-nickel alloys in off-shore engineering', Clive Tuck (Langley Alloys, Meighs Limited) 04/02
'Tungum Alloy (Tubing)- An Old-fashioned Material in a Modern World', Bill Inglis (Tungum Hydraulics Ltd) 04/02
'Beyond Bronze: Alternative materials for ship propellers?', Robin Oakley (DERA) 07/01
'Corrosion and Biofouling Performance of 90-10 and 70-30 Copper Nickels in Marine Environments', Carol Powell (Copper Development Association) 04/01
'High Pressure Air cylinders reducing through-life costs', Ritchie Brown (BAESEMA) 07/00
'The effect of copper corrosion products on the crevice corrsosion of Stainless Steels',Roger Francis (Weir Materials) 03/99
'High strength cupro-nickels - past, present and future', Clive Tuck (Meighs Langley Alloys Division Ltd) 10/98
'Coupling of stainless steel and nickel aluminium bronze - successes and disasters', Roger Francis (Weir Materials) 03/98
'The development and service parameter characterisation of Nibron Special® - a very high strength cupronickel resistant to degradation in diverse marine environments', Keith Bendall, Columbia Metals Ltd 01/98
"Carbon films on Cu alloys", Adrian Graham, AEA Technology 10/97
"Comparison of the corrosion properties of cast aluminium bronze
with stainless steels",
Mr Vin Calicut, Copper Development Association
"Development of a new alloy for high strength Cu-Ni tubing"
, Mr Keith Bendall, Langley Alloys
‘Service Experience of Marinel High Strength Cupronickel Alloy’, Dr Clive D S Tuck, Langley Alloys 04/94
'Effects of alloy composition and conditions of use on the performance of
copper-nickel sheeting for small boats',
Mr
Hector Campbell, Consultant
‘Computer Modelling in the Design and Operation of Oil & Gas Fields and its Role in Effective Asset Management’, Robert A Adey, CM BEASY 04/10
'Marine Corrosion Control - the good, the bad and the ugly', David Moran, Lorina Corrosion Control 01/10
'Corrosion of Tidal Turbines’, Stephen Turnock, University of Southampton 07/09
‘Response of 70-30 CuNi to conditioning pre-treatments and sulphide exposure’, R Oakley & J. Galsworthy, QinetiQ 01/09
'Advances in On-Line Corrosion Monitoring Techniques', Mark Mulvaney, Rohrback Cosasco Systems UK Ltd 10/08
‘Corrosion Control on Marine Reinforced Concrete’, Brian Wyatt, Corrosion Control 07/08
'Managing Corrosion in Upstream Hydrocarbon Production', Bijan Kermani, Keytec 07/08
‘Oil & Gas Related Corrosion’, Chris Fowler, Bodycote Testing 04/08
‘Corrosion of Welds’, Mike Robinson, Cranfield 01/08
‘Exemplary Long-Term Performance of Certain Materials in Marine Environments’, Bopinder Phull, Consultant (ex LaQue) 04/07
‘The challenge of Developing Environmentally Friendly Corrosion Inhibitors for North Sea Application’, M. Jordan and N. Feasey (Nalco) 01/07
‘Identification & protection against ALWC in UK ports’, Ian Spring, Corrosion Control Services Ltd, 01/06
'Oil and Gas Corrosion Related Work', Graham Gibb (Lloyds Register EMEA) 04/05
‘Corrosion Management’, Derek Milliams, Advanced Corrosion Management Services Ltd 10/04
‘Modern Surface Analysis Techniques and their Possible Application to Corrosion Issues’, John Sullivan, Midlands Surface Analysis 04/10
‘Material Testing in Super Critical CO2 Environments’, Matthew Peet, CAPCIS, 04/10
'Development of Corrosion Fatigue Testing in Sour Oilfield Environments’, Dean Horspool, Exova/University of Birmingham 10/09
‘Corrosion Testing in Support of Marine Applications’, Robin Oakley, QinetiQ 04/09
'Testing and Experience of Metallic Components in Subsea Hydraulic Control Fluids', Simon McManus, MacDermid Offshore Solutions 10/07
'The effect of surface finish on corrosion behaviour of super-duplex stainless steel', Bill Deans, Department of Engineering, Kings College, Aberdeen 04/07
‘Corrosion failure investigation techniques and case studies’, Robin Oakley (QinetiQ) 01/07
‘Organic coatings, using results for Scanning Kelvin Probe and Scanning Acoustic Microscopy’, John Sykes (Oxford University) 01/07
‘Guided Wave Technology at TWI: present & future capabilities’, Graham Edwards, TWI 04/06
‘The Vagaries of Corrosion Testing’, Phil Dent & Chris Fowler, Bodycote Materials Testing 10/04
‘Assessment of Corrosion and Cracking Susceptibility of Welds’, Alan Turnbull (NPL) 04/04
‘Corrosion in 40 Minutes - Evaluating
the Susceptibility of Welds’, Bill Nimmo (NPL)
‘Why Listen to
Electrochemical Noise? Erosion-corrosion
related noise of HVOF aluminium bronze and nickel aluminium bronze coatings’
T.S.
Tan, R.J.K. Wood and J.A. Wharton (Surface Engineering & Tribology Group,
School of Engineering Sciences, University of Southampton)
'Stress Corrosion Cracking of Precipitation-hardened Stainless Steel Bolting', P. Dent (Bodycote Materials) and Roger Francis (Weir Material Services) 10/02
‘Corrosion Fatigue - From Pits to Cracks’, Bob Akid (Sheffield Hallam University) 07/02
‘Flow Corrosion of Austenitic and Superduplex Stainless Steels’, RJK Wood & JA Wharton (Surface Engineering & Tribology Group, School of Engineering Sciences, University of Southampton) 07/02
'Why or is there a gap between laboratory test data and field experiences using high alloyed SS for seawater handling', Trond Rogne (SINTEF) 10/01'Developments in modelling crevice corrosion', John Oldfield (Cortest) 10/00
'Cost of corrosion', Nigel Whitehouse (PRA) 04/00
'A model for corrosion of the depleted zones around sigma precipitates produced during welding of super duplex stainless steel', Roger Francis (Weir Materials) 01/00
'Metallurgical examination during weld procedure qualification for ferrite-austenite stainless steels', Trevor Gooch (TWI) 01/00
'Localised Corrosion: Implications and assessment methods for structural integrity' Bob Akid (SIRIUS) 10/99
'Monitoring of polyurethane coatings in flowing saline slurries', Rob Wood (Southampton University) 10/99
'Examination of coating failure in marine environments using scanning acoustic microscopy', John Sykes (Oxford University) 07/99
'Scanning tunnelling microscopy (STM) and marine corrosion', Peter Farr (Birmingham University) 07/98
'Relating test procedures to service situations', Hector Campbell 04/98
'Comparison of high strength steel corrosion fatigue data with the revised PD6493 guidance', Alan Smith (TWI) 04/98
"Corrosion fatigue of cathodically protected high strength steels - the role of sulphate reducing bacteria", Dr Mike Robinson, Cranfield 01/97
"Corrosion behaviour of martensitic stainless steels in slightly
sour oilfield environments", Dr Mick Schofield, Cortest Laboratories Ltd
‘Mapping of Corrosion Using T-Scan Ultrasonic Imaging’, Mr Bryan Kenzie, TWI 01/94
‘Service Recommendations for CuNi 90/10 Seawater Piping Systems’, Wilhelm Schleich (KM Europa Metal) 01/04
'Materials selection for corrosion control in desalination plant', Dr Trevor Hodgkiess, Glasgow University 02/96
‘The Real Cost of Corrosion’, Chris Fowler, Exova and President of NACE International 04/10
‘Learning from Failures’, Derek Bates (DRB Materials Technology Ltd) 07/05
‘The Behaviour and Application of Stainless Steels in Water Treatment Plants & Distribution Systems’, Carol Powell (NiDI) 07/03
‘Why Listen to
Electrochemical Noise? Erosion-corrosion
related noise of HVOF aluminium bronze and nickel aluminium bronze coatings’
T.S.
Tan, R.J.K. Wood and J.A. Wharton (Surface Engineering & Tribology Group,
School of Engineering Sciences, University of Southampton)
'Corrosion and cracking effects on the structural safety of ships', Iain Kennedy (QinetiQ, Rosyth) 04/02
‘Material Selection for Corrosion Prevention’, Roger Francis, (Weir Materials & Foundries Ltd). 01/02
'Cost of corrosion', Nigel Whitehouse (PRA) 04/00
'Life cycle costing for offshore structures', Kjell Haughland (Jotun-Henry Clark) 01/99
'Latest developments in the conservation of large ships', Des Barker (Portsmouth University) 10/98
"Seawater and firewater systems",
Dr Mike Swidzinski,
Phillips Petroleum Co.
"Clad materials - An economic solution"
,
Dr Liane Smith, Intetech, Consultant to NiDI
"The cost of corrosion - An economic assessment"
, Dr Bijan Kermani, BP International
‘Corrosion Design Data Requirements – a design house view’, Dr Mike Swidzinski, Kvaerner H&G Offshore 04/94
‘Materials and corrosion experiences of British Gas’, Mr
Richar
'Life Cycle Costing', D.J. Cochrane, NiDI 06/93
'Development of Corrosion Fatigue Testing in Sour Oilfield Environments’, Dean Horspool, Exova/University of Birmingham 10/09
'Corrosion of Electronic Components on Phalanx Naval Defence Platforms', Ben Hooker, Devonport Royal Dockyard 07/08
‘Oil & Gas Related Corrosion’, Chris Fowler, Bodycote Testing 04/08
‘Factors Informing the Hydrogen Induced Damage to Steels in Upstream Service’, Frank Dean, Ion Science 04/08
'Stress Corrosion Cracking of NAB’, Jean-Loup Heuzé, DCN 04/08
'Learning from Failures 2', Derek Bates, Materials Technology Ltd 10/07
‘X-ray Tomography Techniques for Localised Corrosion and Environmentally Assisted Cracking Studies’, Brian Connolly, Birmingham University 04/06
‘Avoiding hydrogen embrittlement failures of duplex and superduplex stainless steel in subsea service’, Paul Woollin, TWI, 01/06
‘The Degradation of Polymer Composites in Marine Environments’,
Bill Broughton (NPL)
'Nickel alloys in offshore oil, gas and marine applications', Steve McCoy (Special Metals) 04/03.
‘Potential Control and Hydrogen Embrittlement – An Update’, Robin Jacob (Corrosion Consultancy Ltd) 07/02
'Recent developments in the use of high strength cupro-nickel alloys in off-shore engineering', Clive Tuck (Langley Alloys, Meighs Limited) 04/02
'Hydrogen embrittlement Stress Corrosion Cracking of Superduplex Stainless Steel Under Cathodic Protection', Paul Woollin (TWI) 10/01
'Hydrogen embrittlement in superduplex stainless steels', David Baxter (DERA) 10/99
'Cathodic protection and hydrogen embrittlement', Robin Jacobs (Global Corrosion) 07/98
"Effect of minor constituents in seawater on corrosion", Dr Brian Todd, NiDi Consultant 07/97
"Some aspects of the environment sensitive behaviour of marine fastener alloys", Dr Clive Tuck. Columbia Metals 10/96
"The performance of concretes in chloride containing conditions", Mr Ray Cox, BRE 07/96
‘Service Experience of Marinel High Strength Cupronickel Alloy’, Dr Clive D S Tuck, Langley Alloys 04/94
'Hydrogen Embrittlement of Corrosion Resistant Alloys', Dr Roger Francis, Weir Materials 09/93
‘Erosion Corrosion Performance and prediction for Marine Alloys’, Anne Neville and Xinming Hu, University of Leeds 04/09
‘Erosion-Corrosion: Models and Physical Understanding – do we have any?’, Robert Wood, University of Southampton 07/07
‘Corrosion failure investigation techniques and case studies’, Robin Oakley (QinetiQ) 01/07
‘Corrosion
Performance of NAB Under Seawater Immersion and Erosion-corrosion Conditions’,
Rakesh Barik, Julian Wharton & Robert Wood ( Surface Engineering &
Tribology Group, School of Engineering Sciences, Southampton University) &
Keith Stokes (DSTL)
‘Advantages of CuNi 90/10 pipes for sea water service. Recent results from testing in natural North Sea water’, Manfred Jasner (Marine Applications, KM Europa) 07/02
'Erosion-corrosion of materials for drill bits offshore', Myrna Reyes & Anne Neville (Heriot Watt University) 04/02
'Erosion-corrosion of marine pipework: failure of HVOF coatings', Andrew Speyer (University of Southampton) 01/01
'Corrosion and erosion-corrosion coatings of thermally sprayed Cermet coatings', Trevor Hodgkiess (Glasgow University) 03/99
'Mechanical and electrochemical interactions during erosion-corrosion in aqueous slurries', Anne Neville, Heriot Watt University 01/98
"Some corrosion mechanisms of tubes and pipes", Mr Ritchie Brown, BAeSEMA 04/96
"Performance of marine materials under erosive flow
conditions", Dr Robert Wood, Southampton University.
'Galvanic Corrosion Performance of High Strength Copper-nickel Alloys in Seawater', Julian Wharton, University of Southampton 10/09
"Galvanic coupling of duplex stainless steels", Aeronwen
Griffiths, NPL
"Galvanic coupling of materials with stainless steels", Dr
Roger Francis, Weir Materials Ltd 09/94