Marine Corrosion Club logo

Technical presentations - Abstracts (part 2)

Abstracts are provided where shown.


<..  Further Topics:  A to H

Inspection Techniques

‘Non-Destructive Testing in a Marine Environment’, Patricia Conder & Graham Marshall, Sonomatic Ltd, 04/17
‘A New Risk-based Method for Assessing Microbiological Induced Corrosion’, Matin Momeni, DNV-GL, 01/17
‘Optimisation and Validation of Internal Corrosion Direct Assessment – Prediction vs Reality’, Lewis Barton, MACAW Engineering, 01/17
‘Corrosion Failure Investigations and the Role of an Expert Witness’, Phil Munn, Midland Corrosion Services Ltd, 01/17
Developments in Coating Inspection Methods’, John Fletcher, Elcometer (President of ICorr), 04/16

Advances in the Inspection and Assessment of Corrosion in Engineering Structures’, Shaun Smalley & Alex McLay, TUV Rheinland Sonovation Ltd, 07/14

Corrosion Control and Materials Selection for Optimized Oil and Gas Asset Life’, Janardhan Saithala, GL Noble Denton 07/13

QA/QC Tools to Ensure the Quality of Duplex Stainless Steel Components’, Roger Francis, Rolled Alloys 04/12

Is There Value in Translating New Wireless Corrosion and Erosion Monitoring Technology to Upstream O&G?’, Adrian Bowles, QinetiQ, 12/4/11

Effective Assessment of Corrosion Using TOFD and Phased Array Applications’, Tim Armitt, Lavender NDT 07/09

Optical 3D Surface Metrology’, Brian Kyte, Alicona 01/09

'What Reliability Engineers need to know about Corrosion’, John Strutt, Boreas Consulting 01/08

'Thin Film Corrosion Sensors – Combating the Effects of Time and Pilots', Steve Harris, BAE Research Centre 07/07

Long range guided wave pipe inspection for oil pipelines and offshore risers’, Prof Peter Cawley (Imperial College, London) 10/06

Inspection of GRP and composites for marine applications’, Gary Penney (TWI) & ‘State-of-the-art techniques for the ultrasonic inspection of large area (marine) composite structures’,  Richard Freemantle (NDT Solutions) 10/03

Corrosion in 40 Minutes - Evaluating the Susceptibility of Welds’, Bill Nimmo (NPL) 07/03

'Latest technology for the inspection of corrosion degradation in the offshore oil & gas industry', Ian Bradley (OIS) 07/01

'A review of procedures for assessing corroded vessels and pipelines', Alan Smith (TWI) 04/00

'Corrosion Monitoring - Fact or Fiction', Colin Britton 07/99

'Novel techniques for the assessment of corroded pipework' , Robert Gunn (Plant Integrity) 03/98

'Coupling of stainless steel and nickel aluminium bronze - successes and disasters', Roger Francis (Weir Materials) 03/98

"The use of advanced electrochemical techniques for plant corrosion surveillance", Dr Dave Eden, Mentor-1 Group   07/97

Low Alloy Steels

Influence of Localized Pit Distribution & Bench-Shaped Pits in the Ultimate compressive Strength of Steel Plating for Shipping’ Yikun Wang, Julian Wharton & R Shenoi, University of Southampton, 10/15

Corrosion Control of Offshore Wind Turbine Structures - specification, application and performance of coating systems’, Thomas Walsh, RWE, 01/15

Cathodic Protection System Selection for Corrosion Mitigation Inside Offshore Wind Turbine Monopiles’, Robin Jacob, CP Consultancy, 01/15

Understanding Corrosion Protection by Formation of Iron Carbonate Films in CO2 Conditions’, Danny Burkle, University of Leeds, 01/15

Microbiologically Influenced Corrosion in Offshore Environments. Have we seen the limits of microbial action?’, Felipe Leon Morales, Endures (TNO), Netherlands, 10/14

'Military Wrecks and Corrosion Management', Matt Skelhorn, Salvage &Marine Operations, MoD, 07/14

Corrosion in Power Plant Boilers’, Paul James, E.ON Technologies (Ratcliffe) Ltd 04/14

'Corrosion Control inside Offshore Wind Farm Monopile Foundations', Lisbeth Hilbert, FORCE Technology, Denmark 01/14

'The SOHIC Story: A 30 Year Project', Chris Fowler  04/13

'Full Ring Corrosion Test to Evaluate H2S Corrosion Susceptibility of a Subsea Pipeline in External Sour Environment’, Tanvir Sumon, Saipem Ltd 10/12

'Novel Treatment of Accelerated Low Water Corrosion on Harbour Structures’, Barry Lamb, BAC Corrosion Control Ltd 10/09

Corrosion of Welds’, Mike Robinson, Cranfield 01/08

Exemplary Long-Term Performance of Certain Materials in Marine Environments’, Bopinder Phull, Consultant (ex LaQue) 04/07

Corrosion behaviour of carbon steel, low alloy steel and CRAs in partially deaerated seawater and comingled produced water’, M. J. Schofield, CAPCIS Ltd 04/06

‘Corrosion Fatigue - From Pits to Cracks’, Bob Akid (Sheffield Hallam University) 07/02

'Coming to a Sheet Pile Near You... The Bug of the Millennium- A Wholly Practical Guide to Actual Holes', Mike Hodgson (John Martin Construction Ltd) and Tom Shelley (Felixstowe Dock & Railway Co.) 07/00.

'Corrosion of carbon-manganese steel welds', Trevor Gooch (TWI) 04/98

'Comparison of high strength steel corrosion fatigue data with the revised PD6493 guidance', Alan Smith (TWI) 04/98

“Nuclear Electric's experiences of corrosion in cooling water systems”, Mr Terry Parsons, Nuclear Electric  01/95

Magnesium Alloys

'New Magnesium Alloy Technology', Nick Jeal & Paul Lyon (Magnesium- Elektron) 01/05

Marine Architecture

'Corrosion Protection of Offshore Structures Using Thermal Spray Coatings', Shiladitya Paul, TWI, 10/17

‘Interpreting Offshore CP Field Data’, Alex Delwiche, Deepwater EU Ltd, 10/17

‘Designing Marine Reinforced Concrete Structures to Achieve Best Possible Up-throw of Current from Immersed Anodes to Bars above the Water Level’, John Baynham, BEASY, 01/17

The Selection of Gaskets for Stainless Steel Seawater Piping Systems’, Roger Francis, RF Materials, 07/16

Microbially Influenced Corrosion of Copper-Nickel Tubed Marine Coolers: investigations and solutions’, Robin Oakley, QinetiQ, 07/16

Internal Corrosion Issues within Offshore Wind Monopile Foundations’, Claire Canning, EDF Energy/IDCORE, 04/16

Internal Corrosion and CP of Monopiles’, Robin Jacob, CP Consultancy & Brian Wyatt, Corrosion Control 01/16

Cathodic Protection Retrofits - The Silence of the Codes’, Chris Googan, Anticorrosion Engineering 01/16

'Subsea Small Bore Tubing - Material Selection and Corrosion Risk Assessment’, Marco Rapone, GE Oil & Gas, 10/15

'Materials for Seawater Applications: PREN as a Selection Criteria’, Jozef Soltis, MACAW Engineering, 04/15

Corrosion Control of Offshore Wind Turbine Structures - specification, application and performance of coating systems’, Thomas Walsh, RWE, 01/15

Cathodic Protection System Selection for Corrosion Mitigation Inside Offshore Wind Turbine Monopiles’, Robin Jacob, CP Consultancy, 01/15

'CP and Structural Assessments of Aging Jetties - What Laid Beneath', Chris Lynch, Corrpro Companies Europe, 01/15

Corrosion Issues on Ships’, Clive Tuck, Lloyd’s Register EMEA, 10/14

'CP Strategies for FPSOs', Alex Delwiche, Deepwater EU Ltd 07/14

'Corrosion Control inside Offshore Wind Farm Monopile Foundations', Lisbeth Hilbert, FORCE Technology, Denmark 01/14

Corrosion Resistant Steel for Cargo Oil Tanks’, Kenji Katoh & Clive Tuck, Lloyd’s Register EMEA  10/13

Microbially Influenced Corrosion in both Oil Lubricated and Sea Water Lubricated Stern Tube Systems’, Graham Hill, ECHA Microbiology 07/13

Varanus Island Incident: A Technical Review of Lessons Learned, with applications to European Gas and Oil Pipeline Operators’, Brian Wyatt, Corrosion Control  04/13

'Corrosion Testing Protocols for Ballast Tanks for Ships', Tim Illson, G L Noble Denton 01/12

Hybrid Electrochemical Treatment of Marine Concrete Structures’, Gareth Glass, Concrete Preservation Technologies, 7/11

'Corrosion of Copper-30% Nickel Submarine Seawater Cooler Tubes', John Galsworthy, QinetiQ. 10/10

'The Sheathing of Hot Risers with CuNi', Bernd Sagebiel, KME Germany AG & Co. KG 7/10

Numerical Simulations for Design and Monitoring of Offshore Structures’ ICCP Systems’,Jacques Parlongue, Elsyca, Belgium 04/10

Computer Modelling in the Design and Operation of Oil & Gas Fields and its Role in Effective Asset Management’, Robert A Adey, CM BEASY 04/10

'Marine Corrosion Control - the good, the bad and the ugly', David Moran, Lorina Corrosion Control 01/10

'Cathodic Protection of the Thames Barrier', Brian Wyatt, Corrosion Control 07/09

'Corrosion of Tidal Turbines’, Stephen Turnock, University of Southampton 07/09

CP on Offshore Wind Farms & Renewables’, Ross Fielding, Impalloy 04/09

'Design and Fabrication Experiences with Titanium in Offshore Platforms’, Torfinn Havn, Ztrong AS, Norway 04/08

What Reliability Engineers need to know about Corrosion’, John Strutt, Boreas Consulting 01/08

Electrochemical Behaviour of CuNi 90/10 in Chlorinated Seawater under Stagnating Conditions.’, Wilhelm Schleich , KME 04/07

Performance Monitoring and Analysis of Ships’ Tank Coatings’, Keith Lucas, Director of Center for Corrosion Science & Engineering, US Naval Research Laboratory 10/05

Cathodic Protection of reinforced concrete in the marine environment’, Jim Preston (Corrosion Control Services Ltd) 04/05

'Seawater Materials in the Oil and Gas Sector', Doug Stannard (Kellogg, Brown & Root) 01/05

'Problems on Corrosion in Marine Piping', Jian-Zhong Zhang and David Howarth, Lloyd's Register 10/04

Demands and expectations to protective coating systems: FPSOs versus Merchant Vessels, a few crucial differences’, Kjell Haugland (Jotun Paints) 07/04

The Use of Titanium in Naval Applications’, John Fowler (Rolls Royce) 01/04

Composites used in Minesweepers’, Jody Dazel-Job (QinetiQ, Rosyth) 10/03

Rules for, and Applications of, Marine Composites’, John Howson (Lloyds Register) 10/03

'Corrosion and cracking effects on the structural safety of ships', Iain Kennedy (QinetiQ, Rosyth) 04/02

'Latest developments in the conservation of large ships', Des Barker (Portsmouth University) 10/98

"Investigation of marine corrosion failures" , Mr Ken Farrow, RTD UK  10/95

Marine Equipment

'High Alloy Stainless Steels for Seawater Heat Exchangers', Nicolas Larché, Institut Corrosion, France, 04/17

‘Optimisation and Validation of Internal Corrosion Direct Assessment – Prediction vs Reality’, Lewis Barton, MACAW Engineering, 01/17

The Selection of Gaskets for Stainless Steel Seawater Piping Systems’, Roger Francis, RF Materials, 07/16

New Duplex Stainless Steel for Line Pipe Material in Slightly Sour Environment’, Toshio Mochizuki, NSSMC, 04/16

The Use of Superduplex Stainless Steel in Low Oxygen Injection Waters’, Roger Francis 01/16

'Marine Growth Prevention Systems’, Julianna Measures, Cathelco, 07/15


Internal Cathodic Protection of Offshore Sea Water Pump Caissons’, Robin Jacob, CP Consultancy & Brian Wyatt, Corrosion Control 04/14

Effect of Service Conditions on Seawater Corrosion Risk = Influence of Corrosion Potential and Cathodic Efficiency’, Nicolas Larché, Institut de la Corrosion, France 04/14

Corrosion Challenges of Ageing Offshore Assets’, Pat Stokes, MACAW Engineering Ltd 04/14
 

Materials for Diffusion-bonded Heat Exchangers’, Xiuqing Li, Heatric Division of Meggitt (UK) Ltd 01/14

Corrosion Control and Materials Selection for Optimized Oil and Gas Asset Life’, Janardhan Saithala, GL Noble Denton 07/13
The Role of QA/QC in Corrosion Failures - a Case Study’, Roger Francis, RA Materials 7/10 'Corrosion in Seawater Cooling Systems’, Clive Tuck, Lloyd's Register EMEA 10/09 'Corrosion of Electronic Components on Phalanx Naval Defence Platforms', Ben Hooker, Devonport Royal Dockyard 07/08

'Testing and Experience of Metallic Components in Subsea Hydraulic Control Fluids', Simon McManus, MacDermid Offshore Solutions 10/07

Copper nickel chromium alloy as a replacement for nickel aluminium bronze in sea water system application, Jagath Mawella, Sea Technology Group, DPA/MoD, 01/06

'Seawater Materials in the Oil and Gas Sector', Doug Stannard (Kellogg, Brown & Root) 01/05

'Problems on Corrosion in Marine Piping', Jian-Zhong Zhang and David Howarth, Lloyd's Register 10/04

Corrosion Management’, Derek Milliams, Advanced Corrosion Management Services Ltd 10/04

New DNV Recommended Practices on Submarine Pipeline Corrosion Control’, Tomas Sydberger (DNV, Norway)  04/04

'Corrosion in our Ports and Harbours', Roddy James (CorrOcean) 04/03.

Current Requirements and Developments for Marine Anti-fouling Paints, Julian Hunter, Akzo Nobel International Paints)  01/03

‘Material Selection for Corrosion Prevention’, Roger Francis, (Weir Materials & Foundries Ltd). 01/02

Development of Titanium/Steel Composite Risers’, Phil Jaques (Oil States Industries (UK) Ltd) 01/02

'High Pressure Air cylinders reducing through-life costs', Ritchie Brown (BAESEMA) 07/00

'Cost of corrosion', Nigel Whitehouse (PRA) 04/00

'Corrosion issues with subsea electrical connectors', Allan Nicholson (Tronic Ltd) 03/99

'West of Shetland - Some Experience', Bill Murphy (BP-Amoco) 03/99

'The BT Global Challenge Round the World Yacht Race', Alastair Hackett (BT Challenge Business) 01/99

'Life cycle costing for offshore structures', Kjell Haughland (Jotun-Henry Clark) 01/99

'Latest developments in the conservation of large ships', Des Barker (Portsmouth University) 10/98

'Incorporating lessons learned into the corrosion engineering of the BP Bruce Phase II Subsea Development', Charlie Barraclough (Kvaerner Process) 07/98

'Printed circuit heat exchangers in offshore applications', Tony Johnston (Heatric) 04/98

'Internal corrosion of seawater lift pump caissons', Paul Badelek (BP) 03/98

"Performance of riser splash zone protective cladding", Paul Badelek, BP   10/97

"Overview of materials used for seawater handling on offshore platforms", Alan Warburton. Brown & Root   10/96

"Some aspects of the environment sensitive behaviour of marine fastener alloys", Dr Clive Tuck. Columbia Metals   10/96

"Downhole injection of raw sea water", Dr Roger Francis, Weir Materials   04/96

"Seawater and firewater systems", Dr Mike Swidzinski, Phillips Petroleum Co.  02/96

"Development in materials technology for marine pumps", Mr Len Phillips, Weir Pumps  01/96

 "Gasket materials in the marine environment" , Mr Peter C Snitter, Klinger Ltd  10/95

"Investigation of marine corrosion failures" , Mr Ken Farrow, RTD UK  10/95

“Nuclear Electric's experiences of corrosion in cooling water systems”, Mr Terry Parsons, Nuclear Electric  01/95

“The Possibilities For Screwed & Polymer Lined Pipelines”, Philip Jaques, Hunting Oilfield Services  01/95

Corrosion Design Data Requirements – a design house view, Dr Mike Swidzinski, Kvaerner H&G Offshore  04/94

Materials and corrosion experiences of British Gas, Mr Richard Knight, British Gas (ERS)  04/94 

Materials and Material Selection in the Oil and Gas Industry, Mr Roger Hayes, John Brown Ltd  01/94 

'Pros and cons of direct and indirect seawater cooling', Liane Smith, Intetech Ltd (NiDI)  01/93

Microbially Influenced Corrosion (MIC)

‘The Effect of Chlorine Dioxide on Corrosion in Seawater’, Roger Francis, RF Materials, 07/17

Concerns Over Utilizing Aluminium Anodes in Sealed Environments’, Alex Delwiche, Deepwater EU Ltd, 04/17

‘A New Risk-based Method for Assessing Microbiological Induced Corrosion’, Matin Momeni, DNV-GL, 01/17

Microbially Influenced Corrosion of Copper-Nickel Tubed Marine Coolers: investigations and solutions’, Robin Oakley, QinetiQ, 07/16

Biofouling and Corrosion in High Energy Tidal Environments’, Thomas Vance, Plymouth Marine Laboratory, 10/15

Microbiologically Influenced Corrosion in Offshore Environments. Have we seen the limits of microbial action?’, Felipe Leon Morales, Endures (TNO), Netherlands, 10/14

The Resistance of Stainless Steels to MIC’, Roger Francis, RF Materials, 07/14

Effect of Service Conditions on Seawater Corrosion Risk = Influence of Corrosion Potential and Cathodic Efficiency’, Nicolas Larché, Institut de la Corrosion, France 04/14

Microbially Influenced Corrosion in both Oil Lubricated and Sea Water Lubricated Stern Tube Systems’, Graham Hill, ECHA Microbiology 07/13

 'Strategies for Suppressing Microbial Growth Causing MIC’, Edward Hill, ECHA Microbiology Ltd. 10/10

Coatings for Control of Marine Fouling and Microbially Influenced Corrosion’, Bob Akid, Sheffield Hallam University 7/10

'ICCP and Anti Fouling’, Steve Ellis, Cathelco 01/09

Identification & protection against ALWC in UK ports’, Ian Spring, Corrosion Control Services Ltd, 01/06

Microbial Induced Corrosion on Stainless Steels in the Final Stages of Wastewater Treatment’, Anna Iversen (AvestaPolarit) 07/03

'Corrosion in our Ports and Harbours', Roddy James (CorrOcean) 04/03.

'Marine Microbiological Corrosion - are we getting to the bottom of it?', Bob Edyvean (Sheffield University) 10/02

'Corrosion and cracking effects on the structural safety of ships', Iain Kennedy (QinetiQ, Rosyth) 04/02

'Coming to a Sheet Pile Near You... The Bug of the Millennium- A Wholly Practical Guide to Actual Holes', Mike Hodgson (John Martin Construction Ltd) and Tom Shelley (Felixstowe Dock & Railway Co.) 07/00

'Microbial corrosion of stainless steels in marine mud', Roger Francis (Weir Materials) 07/99

'Influence of Biomineralisation and Colloids on Marine biofouling', Mark Varney (University of Southampton) 10/98

"Control of biofouling without tears", Dr Bob Eden. CAPCIS   01/97

"MIC" - Dr Andrew M Pritchard, AEA Technology  09/94

'Biodegradation of materials', Ken Tiller, Nat Corr Service (DTI)  01/93

Nickel Alloys

Corrosion Performance of Metals for the Marine Environment - a different perspective?’, Carol Powell, Copper Development Association & Nickel Institute, 10/14

'High Strength Alloys in the Presence of CP Subsea and the Requirements for Preventing Hydrogen Cracking’, Charlie Barraclough, Commtech Associates 07/13

'Nickel Alloys in Subsea and Downhole O&G Applications’, Steve McCoy, Special Metals PCC Energy Group 04/13

'Corrosion Resistant Alloys for Oil & Gas Engineering Applications', John Grubb, ATI-Allegheny Ludlum 04/09

Prediction of the Service Life of Nickel-based Alloys A625 and A59 and Super Austenitic Stainless Steel B66 in Seawater Using In-house Crevice Corrosion Tests’, Anne-Marie Grolleau, DCNS Cherbourg 10/08

An Overview of Recent Copper-Nickel Sheathing Studies’, Carol Powell, Nickel Institute 07/07

'Nickel alloys in offshore oil, gas and marine applications', Steve McCoy (Special Metals) 04/03

'Nickel alloys in seawater service', Steve McCoy (Inco Alloys) 04/00

'Alloy 825 and 718 gasket corrosion in deep water (500m) connections', Chris Amon (Mentor Subsea Technology Servcies) 04/00

"Update on nickel base alloys in the marine environment" , Mr David Hopkins, Inco Alloys  07/95

Research & Development

'Performance of Thermal Spray Aluminium (TSA) in Marine Environments - A fundamental study of the effect of seawater constituents', Rosa Grinon, University of Leicester, 10/17

‘Corrosion of Cemented Tungsten Carbide (WC-Co) with a View to Understanding Degradation of Drill Bits’, Stephen Herd, Southampton University, 10/17

Influence of Localized Pit Distribution & Bench-Shaped Pits in the Ultimate compressive Strength of Steel Plating for Shipping’ Yikun Wang, Julian Wharton & R Shenoi, University of Southampton, 10/15

The Links Between Subsurface Deformation and Tribocorrosion Performance of Stainless Steels in CO2 Environments', Michael Bryant, University of Leeds, 04/15

Understanding Corrosion Protection by Formation of Iron Carbonate Films in CO2 Conditions’, Danny Burkle, University of Leeds, 01/15

The Effect of Copper on Crevice Corrosion of Stainless Steels’, Roger Francis, RA Materials 01/14

'High Strength Cupro Nickels’, Ivan Richardson, Copper Alloys 01/14

Knowledge Transfer from Experienced to Novice Engineers’, Harvey Hack, Northrop Grumman Corp., USA  10/13

Engineering and Material Challenges for Dense Phase CO2 Pipeline Transport in High Pressure Dynamic Flow Mode’, Kumar Patchigolla, Cranfield 7/12

'Novel Techniques for Studying Corrosion Mechanisms', Trevor Rayment, Diamond, University of Birmingham 01/12

Pitting Corrosion of Stainless Steel: Measuring and Modelling Pit Propagation’, Majid Ghahari, University of Birmingham 10/11

'Mechanisms of Localised Corrosion of Aluminium Alloys', Alison Davenport, University of Birmingham, 7/11

An Investigation on the Erosion-corrosion Mechanisms of UNS S31603 using Focused Ion Beam and Transmission Electron Microscopy’, Shiva Rajahram, University of Southampton. 10/10

'An Interesting Corrosion Problem with Titanium’, Ritchie Brown and Peter Morgan, BAE Systems  07/09

X-ray Tomography Techniques for Localised Corrosion and Environmentally Assisted Cracking Studies’, Brian Connolly, Birmingham University 04/06

'Internet-based Corrosion Information Systems', Bob Cottis (UMIST) 04/04

Corrosion in 40 Minutes - Evaluating the Susceptibility of Welds’, Bill Nimmo (NPL) 07/03

Current Requirements and Developments for Marine Anti-fouling Paints, Julian Hunter, Akzo Nobel International Paints)  01/03

Why Listen to Electrochemical Noise?  Erosion-corrosion related noise of HVOF aluminium bronze and nickel aluminium bronze coatings’ T.S. Tan, R.J.K. Wood and J.A. Wharton (Surface Engineering & Tribology Group, School of Engineering Sciences, University of Southampton)  01/03

 'On the implications of European Framework Programme Six for marine corrosion projects', Cliff Funnell (Cliff Funnell Associates) 10/02

"Electrochemical imaging of corrosion processes", David Williams, University College London  10/97

"Galvanic coupling of duplex stainless steels", Aeronwen Griffiths, NPL   10/96

"Pitting corrosion of duplex stainless steels", Mr L Garfias-Mesias, University of Oxford   07/96

“Mechanisms of Corrosion and SCC Resistance in Duplex Stainless Steels”, A. Barnes and R.C. Newman, UMIST, Corrosion and Protection Centre  01/95

Fundamental Characteristics of Pitting Corrosion, G.L. Burstein, Department of Materials Science and Metallurgy, University of Cambridge  06/93

Stainless Steels

‘The Effect of Chlorine Dioxide on Corrosion in Seawater’, Roger Francis, RF Materials, 07/17

'Direct Observation of Hydrogen Embrittlement in a Duplex Stainless Steel 2205 Tungsten Inert Gas (TIG) Weld', Pierfranco Reccagni, Corrosion and Protection Centre, School of Materials, The University of Manchester, 07/17

'High Alloy Stainless Steels for Seawater Heat Exchangers', Nicolas Larché, Institut Corrosion, France, 04/17

'Stainless Steels and Chlorides - A Good Idea or Not?', Robert Conder, Engineering Materials Solutions Ltd, 04/17

'Hull Biofouling - Still An Area Of Growth', Stuart Downie, Lloyd’s Register EMEA, 10/16

'Role of Highly Concentrated Solutions in Atmospheric Corrosion of Austenitic Stainless Steels', Steven Street, University of Birmingham, 10/16

The Selection of Gaskets for Stainless Steel Seawater Piping Systems’, Roger Francis, RF Materials, 07/16

Susceptibility of Low-temperature Plasma Nitrided 17-4 PH to Sulphide Stress Cracking in H2S-containing Environments’, Mario Coseglio, University of Birmingham, 07/16

New Duplex Stainless Steel for Line Pipe Material in Slightly Sour Environment’, Toshio Mochizuki, NSSMC, 04/16

The Use of Superduplex Stainless Steel in Low Oxygen Injection Waters’, Roger Francis, RF Materials 01/16

'Subsea Small Bore Tubing - Material Selection and Corrosion Risk Assessment’, Marco Rapone, GE Oil & Gas, 10/15

HISC of Super Duplex Stainless Steel in Offshore Application’, Xiaoxue An, Technip Umbilical Ltd, 07/15

The Links Between Subsurface Deformation and Tribocorrosion Performance of Stainless Steels in CO2 Environments', Michael Bryant, University of Leeds, 04/15

'Materials for Seawater Applications: PREN as a Selection Criteria’, Jozef Soltis, MACAW Engineering, 04/15

Corrosion Performance of Metals for the Marine Environment - a different perspective?’, Carol Powell, Copper Development Association & Nickel Institute, 10/14

Improving HISCC Resistance of ZERON 100 Super Duplex Stainless Steels’, Glenn Byrne, Rolled Alloys, 10/14
Corrosion Management of Duplex Stainless Steel Gas Flow Lines’, Janardhan Saithala, DNV GL 04/14

The Effect of Copper on Crevice Corrosion of Stainless Steels’, Roger Francis, RF Materials 01/14

Materials for Diffusion-bonded Heat Exchangers’, Xiuqing Li, Heatric Division of Meggitt (UK) Ltd 01/14

Optimising the Sea Water Corrosion Resistance of Butt Welds in ZERON 100 Pipes’, Glenn Byrne, NeoNickel  10/13

'High Strength Alloys in the Presence of CP Subsea and the Requirements for Preventing Hydrogen Cracking’, Charlie Barraclough, Commtech Associates 07/13

'Marine Corrosion during 25 Years of the MCC/MCF', Roger Francis, RF Materials, 01/13

25 years of Crevice Corrosion Testing of Stainless Steels, the Period After the Discovery of the Biofilm’, Ulf Kivisäkk, AB Sandvik Materials Technology, 01/13

Corrosion Issues in the Offshore Oil and Gas Industry’, Mike Dale, MACAW Engineering Ltd 10/12

Effect of Process Variables on Corrosion Behaviour of Duplex Grades’, Janardhan Saithala, GL Noble Denton 10/12

QA/QC Tools to Ensure the Quality of Duplex Stainless Steel Components’, Roger Francis, Rolled Alloys 04/12

Progress in the Understanding of Umbilical Local Environment’, Thierry Cassagne, Total E&P 04/12

Practical Aspects of Stainless Steel Construction for Marine Applications’, Clive Tuck, LR EMEA 01/12

  Application of Surface Treatments for the Enhancement of Corrosion Resistance’, John Yarnall, Bodycote Hardiff BV & Phil Dent, Exova 01/12

'Novel Techniques for Studying Corrosion Mechanisms', Trevor Rayment, Diamond, University of Birmingham 01/12

Pitting Corrosion of Stainless Steel: Measuring and Modelling Pit Propagation’, Majid Ghahari, University of Birmingham 10/11

Evolution of Cracks from Corrosion Pits’, Alan Turnbull, NPL 10/11

QA/QC Tools to Ensure the Quality of Duplex Fittings and Other Components’, Roger Francis, Rolled Alloys, 04/11

‘Corrosion in Oil and Gas Production with Water Injection Systems with Particular Reference to Underdeposit and Pitting Corrosion and Options Available’, Paulette Sidky, CMC Ltd - Corrosion and Materials Consultants, 01/11

'Development of Corrosion Fatigue Testing in Sour Oilfield Environments’, Dean Horspool, Exova/University of Birmingham 10/09

'Corrosion Resistant Alloys for Oil & Gas Engineering Applications', John Grubb, ATI-Allegheny Ludlum 04/09

'B66 : Superaustenitic Stainless Steel : Mechanical and Corrosion Properties. Development in Progress', Anne Pascale Moiroux & Didier Laveze, Aubert et Duval 10/08

ZERON 21 CLD - a Cast Lean Duplex Stainless Steel’, Roger Francis, Weir Materials & Foundries 07/08

Factors Informing the Hydrogen Induced Damage to Steels in Upstream Service’, Frank Dean, Ion Science 04/08

Welding, Joining and Corrosion’, Charlie Barraclough, Commtech Associates Ltd 01/08

Exemplary Long-Term Performance of Certain Materials in Marine Environments’, Bopinder Phull, Consultant (ex LaQue) 04/07

'The effect of surface finish on corrosion behaviour of super-duplex stainless steel', Bill Deans, Department of Engineering, Kings College, Aberdeen 04/07

Corrosion failure investigation techniques and case studies’, Robin Oakley (QinetiQ)  01/07

'Vistar - The super austenite corrosion solution', Trevor Machin, Vistar Stainless Limited 04/06

Corrosion behaviour of carbon steel, low alloy steel and CRAs in partially deaerated seawater and comingled produced water’, M. J. Schofield, CAPCIS Ltd 04/06

Avoiding hydrogen embrittlement failures of duplex and superduplex stainless steel in subsea service’, Paul Woollin, TWI, 01/06

'Some Standards, Quality & Design Issues in Materials for Seawater Systems’, Roger Francis, Weir Materials & Foundries 10/05

Cathodic Protection of Offshore Systems Based on the New ISO Standard 15889-2.  Some Practical Applications’, Svein Eliassen (Statoil) 04/05

Lean Duplex Stainless Steels’, Chris Baxter (Outokumpu Stainless) 01/05

'Seawater Materials in the Oil and Gas Sector', Doug Stannard (Kellogg, Brown & Root) 01/05

'No Corrosion in 40 Years - A  Mission Impossible?', Mike Dale (MACAW Engineering) 01/04

 The Behaviour and Application of Stainless Steels in Water Treatment Plants & Distribution Systems’, Carol Powell (NiDI) 07/03

Microbial Induced Corrosion on Stainless Steels in the Final Stages of Wastewater Treatment’, Anna Iversen (AvestaPolarit) 07/03

'Experiences with Super Duplex Stainless Steel in Seawater', R. Francis & G. Byrne (Weir Materials & Foundries) 04/03

'Stress Corrosion Cracking of Precipitation-hardened Stainless Steel Bolting', P. Dent (Bodycote Materials) and Roger Francis (Weir Material Services) 10/02

 ‘Flow Corrosion of Austenitic and Superduplex Stainless Steels’, RJK Wood & JA Wharton (Surface Engineering & Tribology Group, School of Engineering Sciences, University of Southampton) 07/02

‘Stainless Steels for Marine Environments', Jan Olsson (AvestaPolarit Ltd.). 01/02

'Hydrogen embrittlement Stress Corrosion Cracking of Superduplex Stainless Steel Under Cathodic Protection', Paul Woollin (TWI) 10/01

'25%Cr Superduplex Stainless Steel - 35 years old and still going strong(er)', Clive Tuck (Langley Alloys, Meighs Limited) 10/01

'The performance of Zeron 100 super duplex stainless steel welds in seawater', Roger Francis (Weir Materials Services Ltd) 07/01

'The development and properties of 25%Cr superduplex stainless steel wirelines, strands and ropes', Keith Bendall (Advanced Metals International Ltd) 07/00

'The commercial use of corrosion resistant metals and their alloys subsea - a marine manufacturers perspective', Phillip Walsh and David Somerville (CRP Marine) 07/00

'Performance of a highly alloyed stainless steel in seawater cooled plate heat exchangers', Lena Wegrelius (Avesta Sheffield) 01/00

'A model for corrosion of the depleted zones around sigma precipitates produced during welding of super duplex stainless steel', Roger Francis (Weir Materials) 01/00

'The effect of copper corrosion products on the crevice corrsosion of Stainless Steels',Roger Francis (Weir Materials) 03/99

'Fundamentals of localised corrosion and SCC of high alloy stainless steels in marine environments', Roger Newman (UMIST) 10/98

'Coupling of stainless steel and nickel aluminium bronze - successes and disasters', Roger Francis (Weir Materials) 03/98

"Electrochemical imaging of corrosion processes", David Williams, University College London  10/97

"The effects of insulation defects on the corrosion of sub-sea superduplex stainless steel process pipes", Dr Roger Francis, Weir Materials   07/97

"Correlation of the microstructure of a 6% molybdenum stainless steel with performance in a high aggressive test medium", John Grubb, Allegheny Ludlum   07/96

"Pitting corrosion of duplex stainless steels", Mr L Garfias-Mesias, University of Oxford   07/96

"Downhole injection of raw sea water", Dr Roger Francis, Weir Materials   04/96

"Welding techniques for high alloy austenitic stainless steels", Dr Trevor G Gooch, TWI   04/96

"Comparison of the corrosion properties of cast aluminium bronze with stainless steels", Mr Vin Calicut, Copper Development Association  02/96

“Mechanisms of Corrosion and SCC Resistance in Duplex Stainless Steels”, A. Barnes and R.C. Newman, UMIST, Corrosion and Protection Centre  01/95

"Corrosion of duplex stainless steel",  Mr Robert N Gunn, TWI  09/94

"Corrosion behaviour of martensitic stainless steels in slightly sour oilfield environments", Dr Mick Schofield, Cortest Laboratories Ltd  09/94

"Galvanic coupling of materials with stainless steels", Dr Roger Francis, Weir Materials Ltd  09/94

Corrosion Engineering Guide for the Selection of Stainless Steels in Aqueous Environments, Dr John Oldfield, Cortest Labs Ltd -Consultant to NiDI   04/94

'Hydrogen Embrittlement of Corrosion Resistant Alloys', Dr Roger Francis, Weir Materials 09/93

Fundamental Characteristics of Pitting Corrosion, G.L. Burstein, Department of Materials Science and Metallurgy, University of Cambridge  06/93

Statutory Requirements

'Hull Biofouling - Still An Area Of Growth', Stuart Downie, Lloyd’s Register EMEA, 10/16

Asset Integrity Management and The Law’, Andy Duncan, Intertek Production and Integrity Assurance, 10/16

Corrosion Resistant Steel for Cargo Oil Tanks’, Kenji Katoh & Clive Tuck, Lloyd’s Register EMEA  10/13

QA/QC Tools to Ensure the Quality of Duplex Stainless Steel Components’, Roger Francis, Rolled Alloys 04/12

A Material Specification Rationalisation Process’, Ian Hamilton, Aker Solutions 04/09

  The challenge of Developing Environmentally Friendly Corrosion Inhibitors for North Sea Application’, M. Jordan and N. Feasey (Nalco) 01/07

  Cathodic Protection of Offshore Systems Based on the New ISO Standard 15889-2.  Some Practical Applications’, Svein Eliassen (Statoil) 04/05

New DNV Recommended Practices on Submarine Pipeline Corrosion Control’, Tomas Sydberger (DNV, Norway)  04/04

  Rules for, and Applications of, Marine Composites’, John Howson (Lloyds Register) 10/03

Titanium Alloys

Corrosion Performance of Metals for the Marine Environment - a different perspective?’, Carol Powell, Copper Development Association & Nickel Institute, 10/14

Materials for Diffusion-bonded Heat Exchangers’, Xiuqing Li, Heatric Division of Meggitt (UK) Ltd 01/14

'An Interesting Corrosion Problem with Titanium’, Ritchie Brown and Peter Morgan, BAE Systems  07/09

'Design and Fabrication Experiences with Titanium in Offshore Platforms’, Torfinn Havn, Ztrong AS, Norway 04/08

'Seawater Materials in the Oil and Gas Sector', Doug Stannard (Kellogg, Brown & Root) 01/05

The Use of Titanium in Naval Applications’, John Fowler (Rolls Royce) 01/04

Development of Titanium/Steel Composite Risers’, Phil Jaques (Oil States Industries (UK) Ltd) 01/02

'The performance of Titanium alloy 5111', David Peacock (The Titanium Information Group) 07/01

'Corrosion performance of titanium heat exchangers', John Fowler (Rolls Royce Plc) 10/99

'Guidelines for design and use of Titanium Heat Exchangers in marine and offshore applications', David Peacock (TIG) 07/99

'Recent developments in the use of titanium offshore', David Peacock (TIG) 03/98

“Nuclear Electric's experiences of corrosion in cooling water systems”, Mr Terry Parsons, Nuclear Electric  01/95

Extending the Applications of Titanium to Marine Environments, Dr Trevor J Glover, Titanium Information Group  01/94

Water Treatment

'No Corrosion in 40 Years - A  Mission Impossible?', Mike Dale (MACAW Engineering) 01/04

The Behaviour and Application of Stainless Steels in Water Treatment Plants & Distribution Systems’, Carol Powell (NiDI) 07/03

Microbial Induced Corrosion on Stainless Steels in the Final Stages of Wastewater Treatment’, Anna Iversen (AvestaPolarit) 07/03

Welding Technology

'Direct Observation of Hydrogen Embrittlement in a Duplex Stainless Steel 2205 Tungsten Inert Gas (TIG) Weld', Pierfranco Reccagni, Corrosion and Protection Centre, School of Materials, The University of Manchester, 07/17

New Duplex Stainless Steel for Line Pipe Material in Slightly Sour Environment’, Toshio Mochizuki, NSSMC, 04/16

Subsea Friction Welding with ROVs or Divers for Cathodic Protection Retrofit Offshore’, Stuart Harvey & Dave Gibson, Proserv UK Ltd, 07/15

Optimising the Sea Water Corrosion Resistance of Butt Welds in ZERON 100 Pipes’, Glenn Byrne, NeoNickel  10/13

'Preferential Weld Corrosion in a Gas Compression System', Dave Moore, Lloyd's Register EMEA, Aberdeen 04/12

Practical Aspects of Stainless Steel Construction for Marine Applications’, Clive Tuck, LR EMEA 01/12

Welding, Joining and Corrosion’, Charlie Barraclough, Commtech Associates Ltd 01/08

Corrosion of Welds’, Mike Robinson, Cranfield 01/08

The Replacement of Corrosion-resistant Castings by Fabricated Weld Overlay Components’, Norman Cooper, BAE Systems 10/07

Welding Issues with Copper Alloys’, Mike Gittos & Chris Punshon (TWI) 07/05

Assessment of Corrosion and Cracking Susceptibility of Welds’, Alan Turnbull (NPL) 04/04

Corrosion in 40 Minutes - Evaluating the Susceptibility of Welds’, Bill Nimmo (NPL) 07/03

'Experiences with Super Duplex Stainless Steel in Seawater', R. Francis & G. Byrne (Weir Materials & Foundries) 04/03

'Post Fabrication Cleaning:  reasons and benefits', Chris Baxter (AvestaPolarit) 04/03

'Post Fabrication Cleaning: Some "Why's and Wherefore's" ' Chris Baxter (Avesta Polarit Ltd) 10/01

'The performance of Zeron 100 super duplex stainless steel welds in seawater', Roger Francis (Weir Materials Services Ltd) 07/01

'Electrochemical techniques for characterising the corrosion susceptibility of welds', Alan Turnbull (NPL) 10/00

'Metallurgical examination during weld procedure qualification for ferrite-austenite stainless steels', Trevor Gooch (TWI) 01/00

'Corrosion of carbon-manganese steel welds', Trevor Gooch (TWI) 04/98

"Welding techniques for high alloy austenitic stainless steels", Dr Trevor G Gooch, TWI   04/96

"Corrosion of duplex stainless steel", Mr Robert N Gunn, TWI  09/94

Wind Energy

Internal Corrosion Issues within Offshore Wind Monopile Foundations’, Claire Canning, EDF Energy/IDCORE, 04/16

Internal Corrosion and CP of Monopiles’, Robin Jacob, CP Consultancy & Brian Wyatt, Corrosion Control 01/16

Corrosion Control of Offshore Wind Turbine Structures - specification, application and performance of coating systems’, Thomas Walsh, RWE, 01/15

Cathodic Protection System Selection for Corrosion Mitigation Inside Offshore Wind Turbine Monopiles’, Robin Jacob, CP Consultancy, 01/15

'Corrosion Control inside Offshore Wind Farm Monopile Foundations', Lisbeth Hilbert, FORCE Technology, Denmark 01/14



MCF home page